Table of Contents
Advertisement
Chapter 3 ICS Command Reference
CONFIG
Level 2
Same as Level 1 operation, with the following additions:
CONFIG xAy {REMOVE|DISABLE|ENABLE}
Options are:
REMOVE
DISABLE
ENABLE
Level 3
Same as Level 2 operation
Level 4
Same as Level 3 operation, with the following additions:
CONFIG {BACKUP|RESTORE} ipAddress filename
Options are:
BACKUP
RESTORE
ipAddress
filename
Remarks None
Related
VER
RestrictionsNone
The following are examples of the
200 SSU-2000 Technical Reference
Use this option to remove module entries from the registry.
A module is removable only if it is physically absent.
Use this option to mark a module inactive to be removed
from the system.
Use this option to restore a previously disabled module to
be active in the system.
Stores the entire SSU-2000 configuration to the specified
server and filename via TFTP protocol.
Restores the entire SSU-2000 configuration from the
specified server and filename via TFTP protocol.
A TFTP server IP address.
A target filename with a variable length of 6 to 40
characters, which may include it's associated path. If this
field is null, the default filename is SSUCONFIG. If this field
is a quoted string, the filename is case-sensitive.
command message format:
CONFIG
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
