ADD
PWD
DELETE
ACCESS
TEMPPWD
DISABLE
ENABLE
UNLOCK
Remarks TL1 requires user names and passwords to be limited to 10 characters.
Related
LOGIN,
RestrictionsNone
12713020-003-2 Revision F.01 – January 2007
Use this option to add a user to the system. If the user
exists in the system, this option exits with an error. After the
user ID is entered, you are prompted for a password.
Password entries are echoed as '*'. Valid password
characters are upper case, alphanumeric characters. After
you enter the password, you are prompted for the user level
(1 through 4).
Changes the password of the specified user. If the user id is
not in the system, this command exits with an error.
Password confirmation is required. This command requires
and
username
password
Deletes the specified user from system. If the user id is not
in the system, this command exits with an error. This
command requires
Changes the access level of a specified user. If the user id
is not in the system, this command exits with an error. Once
the user is entered, the user shall be prompted to change
the access level. This command requires
as its operands.
password
Provides a temporary password to a specified user. The
user at first login must change this temporary password.
This command requires
operands.
Disables, enables, or unlocks the specified user in the
system.
BYE, SECURITY
Chapter 3 ICS Command Reference
as its operands.
as its operand.
username
and
username
password
SSU-2000 Technical Reference 255
USERS
and
username
as its