Table of Contents
Advertisement
Chapter 8 Default Settings
User Changes to Factory Defaults
User Changes to Factory Defaults
Use
Table E-11
Table 8-18. User Changes to Factory Default Settings
Setting
Unit Name
Module Information
configurations
User List
configurations
EIA-232-C Port
Comm Port Timeout
Ethernet IP Address
Warmup Time
Min Tau Limit
Max Tau Limit
362 SSU-2000 Technical Reference
to record any changes you make to the factory default settings.
Factory Default
Communications Module Defaults
SSU_2000
Current Configuration = the configuration that
is currently in use
User Default Configuration = configuration the
user specifies as the default if the current
configuration is invalid or not present
Factory Configuration = the factory default
configuration
Maximum of 25 users including four built-in
users
All three comm ports are set to 9600 baud,
Interactive Mode, CRLF, and Echo on
Five minutes for all (Interactive Mode). (Note:
the unit should have one user added, i.e. not
in the INITUSERTABLE state). If it is in the
INITUSERTABLE state, no timeout is applied.
No Timeout is assigned for the TL1 Mode
IP Address 0.0.0.0
Gateway Address 0.0.0.0
Network Mask 255.255.255.0
Clock Module 1
1200 s
2E: 300 s
TYPE I: 150 s
3E: 150 s
2E: 10 000 s
TYPE I:1200 s
3E: 1200 s
User Changes
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
