Table of Contents
Advertisement
Chapter 2 TL1 Reference
Retrieve Setup Parameters
keepalive
tl1format
pbo
login_evt_dis
elevation
todSource
snm_ena
trap
The response for a Clock module is in the same format described in
Parameters, on page 46.
The response for an input module is in the same format described in the references
in the table below:
Input Module
DS1/E1
GPS
Composite Clock
Sine
Japan Composite Clock
The response for an output module is in the same format described in the
references in the table below:
Output Module
DS1/E1
2048 kHz
Composite Clock
RS-422
E1/2048 kHz
Sine
114 SSU-2000 Technical Reference
is the TL1 or SNMP session timer in minutes. If timer is set to
zero indicate keep alive function is disabled for that session
is {GR831 | GR833}
is {DIS | EVT | REP | NONE}
is {YES | NO}
returns the time for alarm elevation, from 60 seconds to 500 000
seconds. A setting of 0 (zero) means no elevation for the alarm
is the SSU's preferred Time-Of-Day Source {GPS | CLIENT}
{ENA | DIS}
displays V2 format or V3 format, or all V2 and V3 trap formats
Retrieve Input Status
Retrieve Frequency Parameters
Parameters
Retrieve GPS Input Parameters
Parameters
Retrieve Frequency Parameters
,
Retrieve CC Input Parameters
Parameters
Retrieve Japan Sine Input Parameters
Parameters
Retrieve Frequency Parameters
,
Retrieve JCC Input Parameters
Retrieve Output Status
Retrieve 2048 kHz Clock Output Parameters
Retrieve CC Output Parameters
Retrieve RS-422 Output Parameters
Retrieve E1/2048 kHz Output Parameters
Retrieve Japan Sine Output Parameters
Response Format
Retrieve MTIE Parameters
,
Retrieve Alarm
,
Retrieve MTIE
,
Retrieve Alarm
,
Retrieve MTIE
,
Response Format
12713020-003-2 Revision F.01 – January 2007
Retrieve Clock
,
Advertisement
Table of Contents
