Ping - Symmetricom SSU-2000 Technical Reference

PING

Use this command to view network ping (diagnostic) capabilities.
Level 0 Not applicable
Level 1 Not applicable
Level 2
PING dotIp
Use this command to determine if the unit is connected to the network.
This command transmits a packet to the specified address and waits for
a response. If a response is received, the unit displays a successful
command completion message. If no response is received, the unit
times-out and prints an unsuccessful command completion message.
Level 3 Same as Level 2 operation
Level 4 Same as Level 2 operation
Remarks No name server is available. The Internet Protocol (IP) address is
formatted as a decimal dotted address.
Related None
RestrictionsNone
12713020-003-2 Revision F.01 – January 2007
Chapter 3 ICS Command Reference
SSU-2000 Technical Reference 235
PING