Table of Contents
Advertisement
Chapter 2 TL1 Reference
Retrieve Events
Retrieve Events
This command returns stored event data from any or all modules. An aid or aid
range may be used to limit the report to specified modules. The aid code is optional.
With an aid of ALL or null, all event data between start and stop time is returned.
Syntax
RTRV-EVENT:[tid]:[aid]:ctag::[count],[start],[stop];
Parameter
[aid]
[count]
[start]
[stop]
Response Format
One line containing the time stamp and event message is returned for each event in
the log.
^^^"aid:ntfcncde,condtype,srveff,ocrdat,ocrtm:condscr" <cr lf>
where:
= module access identifier
aid
ntfcncde
condtype
= service affecting flag [SA | NSA]: SA = service affecting, NSA =
srveff
non-service affecting
= occurrence date
ocrdat
= occurrence time
ocrtm
= condition description string
condstr
62
SSU-2000 Technical Reference
Value
ALL or null
Retrieves event data between the specified start and stop
time from all modules .
Retrieves event data between the specified start and stop
SxAy
time from the specified module.
Specifies the number of events to retrieve. The default
1 – 500
count is 1.
Specifies the start date and time for data. If the date is null
MM-DD,
but followed by a time, the command defaults to the current
HH:MM
date. If the start time is null, but preceded by a date, the
command defaults to the current time. If the start date and
time are null, the command defaults to the start of the data.
The comma must be present to indicate a null start time.
Specifies the stop date and time for data. If the date is null
MM-DD,
but followed by a time, the command defaults to the current
HH:MM
date. If the stop time is null but preceded by a date, the
command defaults to the current time. If the stop date and
time is null, the command defaults to the end of the data.
= notification code [CR | MJ | MN | CL]
= condition type (event number)
Description
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
