Japan Sine Output Module Alarm Defaults - Symmetricom SSU-2000 Technical Reference

Table 6-32. Japan Sine Output Module Alarm and Event Messages (Continued)
Alarm/
Typical Alarm/Event/Trap
Event/
Response
Trap ID
195 FREQ, 6.312MHz, COML
196 Bypass, On, COML
197 Squelch, Port[5-10], 6,
COML
224 IoName, Set
252 Alm Level, (0), Maj, COML
253 Elevate Time, 86400 sec,
COML
254 Setup, User Default, COML
Table 6-33. Japan Sine Output Module Alarm Defaults
ID Description
000 Hdw Config
001 Configuration
002 Clk-A
003 Clk-B
004 Clk-C
005 Clk-D
006 Clk Selected
007 VCXO
008 PLL
009 Redundant
010 Squelch
011 PortFlt
12713020-003-2 Revision F.01 – January 2007
Japan Sine Output Module Alarms and Events
Corrective Action
User has set the frequency to the specified value.
User has changed the Bypass mode.
User has changed the squelch PQL level.
User has changed the port name.
User has changed the level of specified alarm.
User has changed the alarm elevation time.
User has changed setup to user-defined values.
Alarm Level
Major
Major
Major
Major
Major
Major
Major
Major
Major
Major
Major
Major
Chapter 6 Alarms and Events
Description/
SSU-2000 Technical Reference 331