Table of Contents
Advertisement
Chapter 2 TL1 Reference
Set SNMPv2 Manager Parameters
Set SNMPv2 Manager Parameters
This command allows changes to the SNMPv2 manager table entries.
Syntax
SET-PRMTR-SNMP-MANAGER:[tid]::ctag::mode,[ip];
Parameter
mode
ip
Related Commands
Retrieve SNMPv2 Manager
174 SSU-2000 Technical Reference
Format
ADD – Adds an entry to the manager table. Requires
ADD | DEL
an IP address.
INIT
DEL – Deletes a single entry from the manager table.
Requires an IP address.
INIT – Clears all entries in the manager table. Does
not require an IP address
Specifes an IP address for the ADD and DEL mode
values.
List, on page 119
Description
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
