Retrieve Inventory - Symmetricom SSU-2000 Technical Reference

Retrieve Inventory

This command returns the inventory management information for the SSU-2000
Syntax
RTRV-INV:[tid]::ctag;
or
RTRV-INVENTORY:[tid]::ctag;
Response Format
The response is the complied message followed by the response message(s). A
summary for each module and shelf are returned in the following format:
^^^"aid:desc,hwpart,hwrev,hwserial,swpart,swrev,adapterpart" <cr lf>
where:
is the module or shelf access identifier. See the table below for details.
aid
is the text name of the module. See the table below for details.
desc
is the hardware part number. See the table below for details.
hwpart
is the hardware revision level
hwrev
hwserial
field is the software part number (i.e. 141xxxxx-xxx-x)
sw_art
field is the software revision level
swrev
adapterpart
identification is not available for the module. For detailed information about
adapter identification, refer to Specification, SSU-2000 Input Adapter/
Identification, part number 12613021-001-2.
The aid reported is the shelf address.
The ,
aid desc
aid
S1
S2 – S5
S1
S2 – S5
12713020-003-2 Revision F.01 – January 2007
is the hardware serial number
is the Input adapter part number. If empty, then the input adapter
and are per the following table:
hwpart
desc
SSU-2000 25413120-000-0
SDU-2000 25413023-000-0
SSU-2000e 25413140-000-0
254131140-001-0 (DT)
SDU-2000e 25413141-000-0
25413141-001-0 (DT)
hwpart
SSU-2000 Technical Reference
Chapter 2 TL1 Reference
Retrieve Inventory
75