Table of Contents
Advertisement
Retrieve IP Parameters
This command returns the current Internet Protocol settings for the unit.
Syntax
RTRV-PRMTR-IP:[tid]::ctag;
Response Format
^^^"aaa.aaa.aaa.aaa,mmm.mmm.mmm.mmm,ggg.ggg.ggg.ggg"<cr lf>
where:
aaa.aaa.aaa.aaa
mmm.mmm.mmm.mmm
ggg.ggg.ggg.ggg
Related Commands
Set IP
Parameters, on page 152
12713020-003-2 Revision F.01 – January 2007
= IP address of the unit
= IP mask of the unit
= IP gateway of the unit
Chapter 2 TL1 Reference
Retrieve IP Parameters
SSU-2000 Technical Reference
77
Advertisement
Table of Contents
