Japan Sine Input Module Alarm Defaults - Symmetricom SSU-2000 Technical Reference

Table 6-16. Japan Sine Input Module Alarm and Event Messages (Continued)
Alarm/
Typical Alarm/Event/Trap
Event/
Response
Trap ID
201 Priority, 5, COML
203 Prov PQL, 5, COML
204 MTIE Err Limit, T100, L1, 550,
COML
206 CSFlt, Off, COML
209 Freq Err Limit, Clk-A, 100, COML
210 Freq Clr Limit, Clk-A, 800, COML
211 MTIE Clr Limit, T100, L1, 500,
COML
212 MTIE Limit, DS1, COML, Setting
213 PBO, Report, COML
214 Freq Tau, Clk-A, 400, COML
224 IoName, Set
251 Err Delay, (0), 10 sec, COML
252 Alm Level, (2), Maj, COML
253 Elevate Time 86400 sec, COML
254 Setup, Save, COML
Table 6-17. Japan Sine Input Module Alarm Defaults
ID Description
000 LOS
005 MTIE/L1
006 MTIE/L2
007 CS Fault
009 Ref Qualifier
010 Clock PLL
011 Input PLL
012 Phase Hdw
013 FREQ
014 Hdw Config
12713020-003-2 Revision F.01 – January 2007
A user has changed input priority level.
A user has changed input provisioned PQL.
A user has changed input MTIE limits (L1 | L2).
A user has changed input Cesium Fault control.
The frequency error limit settings have been changed.
The frequency clear limit settings have been changed.
The MTIE error limit settings have been changed.
The MTIE clear limit settings have been changed.
Phase Build-out system response has been changed to the
indicated setting.
The frequency TAU limits have been set.
A user has set the IO Name.
An alarm delay time change.
An alarm level change.
An alarm elevation time change.
User defaults have been set and saved.
Alarm Level
Major
Minor
Major
Minor
Minor
Major
Major
Major
Minor
Major
Chapter 6 Alarms and Events
Japan Sine Input Module Alarms and Events
Description/
Corrective Action
SSU-2000 Technical Reference 315