Table of Contents
Advertisement
Chapter 2 TL1 Reference
Set 2048 kHz Output Parameters
Set 2048 kHz Output Parameters
This command sets the parameters for the specified 2048 kHz Output modules.
Syntax
SET-PRMTR-CLKOUT:[tid]:[aid]:ctag::[pstate],[mode],[level],[bypass],
[fltmode],[squelch];
Parameter
aid
pstate
mode
level
bypass
fltmode
squelch
Empty fields leave parameters unchanged.
Related Commands
Retrieve 2048 kHz Clock Output
130 SSU-2000 Technical Reference
Format
Sets the parameters for the specfied 2048 kHz Output
SxAy[-z]
module [or port].
Turns the specified module [or port] on or off.
ON | OFF
This parameter is ignored.
Outputs are turned on when the active Clock module is at
ACQ | LOCK
or above the specified state.
Allows operation when Clock C is the active clock.
ON | OFF
Turns outputs on or off when the output level exceeds the
OFF | ON |
2.1 V fault threshold.
AUTO
Turns off the specified port if the reference clock PQL
0 | 1-16
exceeds the squelch threshold specified in this field. 0
disables the function.
Parameters, on page 34
Description
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
