Table of Contents
Advertisement
Retrieve SNMPv3 User List
This command returns the current SNMPv3 user list.
Syntax
RTRV-PRMTR-SNMPV3-USER:[tid]::ctag;
Response Format
^^^"username" <cr lf>
where:
username
privacy key is displayed.
Related Commands
Set SNMPv3 User
12713020-003-2 Revision F.01 – January 2007
= user identification string used by SNMPv3. No authentication or
Parameters, on page 178
Chapter 2 TL1 Reference
Retrieve SNMPv3 User List
SSU-2000 Technical Reference 123
Advertisement
Table of Contents
