Table of Contents
Advertisement
Chapter 6 Alarms and Events
Communication Module Alarms and Events
Table 6-4. Basic and Basic +NTP Communications Module Alarm and Event Messages (Continued)
Alarm/
Typical Alarm/Event/Trap
Event/
Response
Trap ID
192
InitUserTable, JAY, COML
193
Add User, DONNA, COML
194
Mod User, CALEB, COML
195
Del User, TEST1, COML
196
Pql Table, DS1, pql(5)=ST2,
COML
197
Pql Factory Dflt, COML
198
Unit Name, , COML
199
NTP Peer Add, 192.5.41.40,
CLIENT, COML
200
NTP Peer Del, 192.5.41.40,
COML
201
NTP Brd Timer, 64 seconds,
COML
202
SNMPv2 User, ADD, id=1,
COML
203
SNMP Agent, V2, COML
204
SNMPv2 Manager, INIT,
192,5.41.39, COML
206
SNMP Trap, ALM, COML
207
Chg KeepAlive, ALL, 15
minutes, COML
208
Operating Mode,
Subtending, COML
209
Notification, V3, COML
210
Login Event, Enable, COML
211
TL1 Format, GR831, COML
212
SNMPv3 User, ADD, id=1,
COML
213
SNMPv3 Manager,
INIT<192.5.41.39, COML
251
Err Delay, (1), 300 sec,
COML
252
Alm Level, (2), Rep, COML
296 SSU-2000 Technical Reference
Corrective Action
Administrator initialized user database.
Administrator added a user to user database.
User/Administrator modified user database.
Administrator deleted user from user database.
PQL database has been modified.
PQL database has been set to factory defaults.
The SSU name has been changed.
An NTP client was added at the IP address shown.
An NTP client was deleted at the IP address shown.
The NTP broadcast server timer has been set to the interval shown.
An SNMP user has been added to the user table in the position
shown.
The SNMP mode has been enabled.
An SNMP Manager has been initialized at the IP address shown.
The SNMP Trap Port has been set to send traps on alarms only.
The Keep Alive timer has been set to the interval shown.
A user has changed the operating mode.
A user has changed the notification format.
A user has changed whether login events are stored.
A user has changed the TL1 format to the specified value.
An SNMP user has been added to the user table in the position
shown.
An SNMP Manager has been initialized at the IP address shown.
A user has changed the alarm delay time.
A user has changed the alarm level.
Description/
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
