Table of Contents
Advertisement
Chapter 3 ICS Command Reference
NTP
RestrictionsThe maximum number of peers is three. Users can assign a newly
created peer to client or broadcast. Normally two peers are used for
clients and one peer is for broadcasting (depending upon user
requirements).
Example
SSU_AUSTIN->ntp
2006-10-03T14:47:50Z ID: SSU2000, Name: SSU_AUSTIN
NTP: CLIENT Mode, SOURCE: 172.16.21.4, Offset:
SERVER: 172.16.21.42, CLIENT Mode
Leap: 0, Stratum: 1, Precision: -19
Client delay:
Client dispersion:
Server offset:
Server delay:
Server dispersion:
Timeserver:
SERVER: 172.16.21.93, CLIENT Mode
Leap: 3, Stratum: 0, Precision: -9
Client delay:
Client dispersion:
Server offset:
Server delay:
Server dispersion:
Timeserver:
SERVER: 172.16.21.4, CLIENT Mode
Leap: 0, Stratum: 1, Precision: -12
Client delay:
Client dispersion:
Server offset:
Server delay:
Server dispersion:
Timeserver:
NTP Setup
2005-05-19T18:25:33Z ID: SSU2000, Name: SSU_2000
CLIENT: 172.16.21.18
BCLIENT: 172.16.21.19
BROADCAST: 172.16.23.255, Timer 64
228 SSU-2000 Technical Reference
0.000000
0.000000
0.000232
0.008254
0.000930
Valid Candidate
0.000000
0.000000
0.000000
0.000000
16.000000
Validating
0.006957
0.001570
0.000156
0.003737
0.000732
Valid Candidate
0.000156
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
