Table of Contents
Advertisement
Command syntax follows these conventions:
{ }
|
[ ]
italics
c
Terminology:
shelf
slot
port
Comm port An EIA-232-C, Telnet, or Ethernet TL1 communications port.
Module selection follows these conventions. Each module selection in a unit is
defined as:
xAy
x
Shelf number (starting from 1)
A
Place holder indicating the slot separator
y
Slot number (starting from 1, left to right, defined by each shelf)
Port selection follows these conventions. Each port of a module is addressed as:
, where:
xAy-z
xAy same as defined for module selection
z
Indicates the port number, starting from 1, left to right
Legal module and port names follow the conventions illustrated by these examples:
1A5-3 indicates shelf 1, slot 5, port 3
1A5 indicates a module in shelf 1, slot 5
The ICS interface allows aliases for modules. Aliases follow the conventions shown
in these examples. For example, assuming a 19 inch chassis, these aliases apply:
CLK-A = Clock A, 1A1
CLK-B = Clock B, 1A12
2BUF-A = Shelf 2, Buffer A, 2A15
2BUF-B = Shelf 2, Buffer B, 2A16
3BUF-A = Shelf 3, Buffer A, 3A15
12713020-003-2 Revision F.01 – January 2007
Signifies more than one parameters choice; one must be entered
Options are separated by vertical bars
Pipe or vertical bar, used to separate multiple parameters or options
Signifies optional parameters
Signifies variable data
Signifies character data (any printable ASCII character)
The actual shelf number of the unit in the system: 1 indicates the
main shelf; 2 through 5 indicate expansion shelves.
The actual slot number in the shelf. Slot numbers begin at 1 and
number from left to right in the shelf.
The actual port number in the slot. The port number begins at 1.
, where:
Chapter 3 ICS Command Reference
Command Syntax
SSU-2000 Technical Reference 189
Advertisement
Table of Contents
