Table of Contents
Advertisement
Chapter 2 TL1 Reference
Retrieve Japan Sine Output Parameters
Line 3 contains:
= module access identifier
aid
squelch#
clock PQL exceeds this value, then the output is turned off. # = port number [1 –
20]
Related Commands
Set Japan Sine Output
80
SSU-2000 Technical Reference
= threshold value [0 | 1 – 16] (where 0 = disabled). If the reference
Parameters, on page 154
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
