Table of Contents
Advertisement
Table 9-1. General Specifications (Continued)
Characteristics
Temperature
Relative Humidity
Altitude
Operating Conditions Specifications
The unit operates at specified parameters in the operating conditions summarized in
Table 9-2.
Table 9-2. Normal Operating Conditions
Parameter
Supply Voltage
Temperature
Temperature Rate of Change
Relative Humidity
Altitude
1. Inlet air temperature, limited convection 15 ft./min.
2. Non-condensing over specified temperature range.
3. The maximum operation ambient temperature shall be reduced by 2°C for every 984 ft.
altitude above 4,921 ft.
The unit is not damaged when exposed to the levels specified in
performance is degraded. The unit returns to specified performance upon returning
to specified operating conditions.
Table 9-3. Exceptional Operating Conditions
Parameter
Supply Voltage
Temperature
Relative Humidity
1. The unit is not damaged if the polarity on the power leads is reversed.
°
2. At 30
C max/hour rate of change.
3. Non-condensing.
12713020-003-2 Revision F.01 – January 2007
–40°C to +72.5°C
100% Non-Immersed
200 ft. below sea level to 13,000 ft. above sea level
Minimum
Maximum
–38
–65
0
50
–
8.3
5
85
–200 ft.
13,000
Minimum
Maximum
–38
–74
–5
50
5
90
Chapter 9 Specifications
Operating Conditions Specifications
Specification
Units
Notes
Volts DC
°
1
C
°
C/Hr
%
2
feet
3
Table
Units
Notes
Volts, DC
1
°C
2
%
3
SSU-2000 Technical Reference 371
9-3, but
Advertisement
Table of Contents
