Retrieve Input Reference - Symmetricom SSU-2000 Technical Reference

Retrieve Input Reference

This command returns the current input reference, reference switch mode, and
reference selection mode.
Syntax
RTRV-INPUT-REF:[tid]::ctag;
Response Format
^^^"port,swtmode,selmode"<cr lf>
where:
= auto return (revertive) selection, auto switch (but not revertive), or no
swtmode
auto switching [AR | AS | OFF]
= reference selection: [PRI | PQL] for priority quality level or status
selmode
message selection of inputs
If the input port is not a valid reference, the DENY response is returned.
Example
SSU_2000 06-05-30 14:42:54
M 100 COMPLD
"S1A05-01,AR,PRI"
;
Related Commands
Set Input Reference, on page 151
12713020-003-2 Revision F.01 – January 2007
Chapter 2 TL1 Reference
Retrieve Input Reference
SSU-2000 Technical Reference 73