Set Jcc Output Parameters - Symmetricom SSU-2000 Technical Reference

Chapter 2 TL1 Reference

Set JCC Output Parameters

Set JCC Output Parameters
This command sets the parameters for the specified Japan Composite Clock Output
module or port.
Syntax
SET-PRMTR-OUTJCC:[tid]:[aid]:ctag::[pstate],[bypass],[400hz],[pcomp];
Parameter
aid
pstate
bypass
400hz
pcomp
Empty fields leave parameters unchanged.
Related Commands
Retrieve JCC Output
156 SSU-2000 Technical Reference
Format
Sets the parameters for the specfied JCC Output module
SxAy[-z]
[or port].
Enables or disables the specified module [or port].
ON | OFF
Allows operation when Clock C is the active clock.
ON | OFF
Enables or disables the 400 Hz BPV removal.
ON | OFF
Sets the phase compensation delay, where 7 = No
0 - 7
compensation and 0 = 2200 ft; the resolution of pcomp
values is 275 ft.
Parameters, on page 82
Description
12713020-003-2 Revision F.01 – January 2007