Chapter 2 TL1 Reference
Retrieve Name
Retrieve Name
This command returns the name assigned to the shelf or to Input or Output ports,
excluding the Line Retiming Module. One name of up to 20 characters is returned
for each port designated by the aid.
Syntax
RTRV-NAME:[tid]:[aid]:ctag;
Parameter
[aid]
Response Format
When the aid is S1A2, the name of the unit is returned. When the aid is an I/O
module or port, the assigned port name is returned. If no name is assigned to a port,
then a null field is returned.
^^^"aid:name" <cr lf>
Related Commands
Retrieve
Header, on page 65
Set
Name, on page 140
80
SSU-2000e Technical Reference
Value
Retrieves the name from the unit.
S1A2
Retrieves the name from the specified module [or port]..
SxAy[-z]
Description
12713140-003-2 Revision E.01 – January 2007