Chapter 2 TL1 Reference
Retrieve Ping
Retrieve Ping
This command allows you to ping a remote host via TCP/IP. Use this command to
verify that the SSU-2000e is communicating over a network.
Syntax
RTRV-PING:::ctag::ip;
Parameter
ip
Response Format
The response message is COMPLD if the ping was successful or DENY (SDNR) if
unsuccessful.
Related Commands
Retrieve
Header, on page 65
Retrieve
Name, on page 80
92
SSU-2000e Technical Reference
Value
Specifies the host address, given in the ###.###.###.###
format, where ### is a number between 0 and 255.
Description
12713140-003-2 Revision E.01 – January 2007