Show Ecofriendly - Allied Telesis x510-28GTX Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW ECOFRIENDLY

show ecofriendly
Overview This command displays the switch's eco-friendly configuration status. The
ecofriendly led
ecofriendly
show ecofriendly
Syntax
Mode Privileged Exec and Global Configuration
Example To display the switch's eco-friendly configuration status, use the following
command:
awplus#
Output Figure 7-6:
Table 3: Parameters in the output of the show ecofriendly command
C613-50170-01 Rev B
C
ONITORING OMMANDS
and ecofriendly lpi
output.
show ecofriendly
Example output from the show ecofriendly command
awplus#show ecofriendly
Front panel port LEDs
Energy efficient ethernet
Port Name
port1.0.1 Port 1
port1.0.2
port1.0.3
port1.0.4
port1.0.5
port1.0.6 Port 6
port1.0.7
port1.0.8
port1.0.9
port1.0.10
...
Parameter
normal
off
normal
(configuration
overridden by eco
button)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
configuration status are shown in the
normal
Status 
Configured
lpi lpi
lpi lpi
lpi lpi
off off
lpi off
off off
off -
off -
off -
off -
Description
The eco-friendly LED feature is disabled and port LEDs
show the current state of the ports. This is the default
setting.
The eco-friendly LED feature is enabled and power to
the port LEDs is disabled.
The eco-friendly LED feature has been disabled with
the eco-switch button, overriding the configuration
set with the ecofriendly led
show the current state of the ports.
show






command. The port LEDs
267