Honda ACCORD HYBRID 2005 Service Manual page 651

22. Check for continuity between PCM connector
t e r m i n a l B2 and body g r o u n d .
PCM C O N N E C T O R B (24P)
P C S ( R E D / Y E L )
1
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
/
17 18 19 20 21 22 23 24
W i r e side of female t e r m i n a l s
Is there continuity?
Y E S — G o t o step 23.
NO—Repair open in the w i r e between the EVAP
canister purge valve and the PCM (B2), then go to
step 25.
23. Measure resistance between EVAP canister purge
valve 2P connector terminals No. 1 and No. 2.
E V A P C A N I S T E R P U R G E V A L V E 2P C O N N E C T O R
1
2
T e r m i n a l side of male t e r m i n a l s
Is there about 33 Q at room temperature?
Y E S — G o t o step 3 1 .
N O — G o t o step 24.
24. Replace the EVAP canister purge valve (see page
11-436).
25. Reconnect all connectors.
26. Turn the ignition switch ON (II).
27. Reset the PCM w i t h the HDS.
28. Do the PCM idle learn procedure (see page 11-340).
29. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0443 is indicated, check for poor
connections or loose terminals at the EVAP canister
purge valve and the PCM, then go to step 1. If any
other T e m p o r a r y DTCs or DTCs are indicated, go to
the indicated D T C s t r o u b l e s h o o t i n g .
N O — G o t o step 30.
30. M o n i t o r the OBD STATUS for DTC P0443 in the
DTCs M E N U w i t h the HDS.
Does the screen indicate PASSED?
Y E S — T r o u b l e s h o o t i n g is complete. •
NO—If the screen indicates FAILED, check for poor
connections or loose t e r m i n a l s at the EVAP canister
purge valve and the PCM, then go to step 1. If the
screen indicates EXECUTING, keep idling until a
result comes o n . If the screen indicates OUT OF
CONDITION, go to step 28 and recheck.
(cont'd)
11-411