Honda ACCORD HYBRID 2005 Service Manual page 545

11. Disconnect the engine m o u n t control unit 20P
connector.
12. Check for continuity between engine m o u n t control
unit 20P connector terminal No. 16 and body
g r o u n d .
ENGINE MOUNT C O N T R O L UNIT 20P C O N N E C T O R
1 2 3 4
i — i
5 6
/
8 9
10 11 12
/
14 15 16 17
/ / 20
CKP1 (BLU)
Wire side of female t e r m i n a l s
14. Connect CKP sensor A/B 6P connector terminal
No. 5 to body ground w i t h a j u m p e r w i r e .
CKP S E N S O R A / B 6P C O N N E C T O R
1 2 3 4 5 6
CKPA (BLU)
J U M P E R WIRE
W i r e side of female t e r m i n a l s
15. Turn the ignition switch ON (II).
Is there continuity?
YES—Repair short in the w i r e between the PCM
(E7) and the engine m o u n t control unit (No. 16),
then go to step 22.
NO—Go to step 27.
13. Turn the ignition switch OFF.
(cont'd)
11-305