Honda ACCORD HYBRID 2005 Service Manual page 360

PGM-FI System
D T C T r o u b l e s h o o t i n g ( c o n t ' d )
55. Reconnect all connectors.
56. T u r n the ignition switch ON (II).
57. Reset the PCM w i t h the HDS.
58. Clear the CKP pattern w i t h the HDS.
59. Do the PCM idle learn procedure (see page 11-340).
60. Do the CKP pattern learn procedure (see page 11-4).
6 1 . Test-drive the vehicle for several minutes in the
range of the recorded freeze data.
62. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P0301, P0302, P0303, P0304, P0305, or
P0306 are indicated, check for poor connections or
loose terminals at the ignition coil, the injector, and
the PCM, then go to t r o u b l e s h o o t i n g DTC P0301,
P0302, P0303, P0304, P0305, or P0306 (see page
11-110). If any other T e m p o r a r y DTCs or DTCs are
indicated, go to the indicated D T C s
troubleshooting.
N O — G o t o step 63.
63. M o n i t o r the OBD STATUS for DTC P0301, P0302,
P0303, P0304, P0305, or P0306 in the DTCs MENU
w i t h the HDS.
Does the screen indicate PASSED?
YES—Troubleshooting is complete. •
NO—If the screen indicates FAILED, go to step 1
and recheck. If the screen indicates EXECUTING,
keep driving until a result c o m e s o n . If the screen
indicates OUT OF CONDITION, go to step 61 and
recheck.
64. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
65. Test-drive the vehicle for several minutes in the
range of the recorded freeze data.
66. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P0301, P0302, P0303, P0304, P0305, or
P0306 are indicated, check for poor connections or
loose terminals at the injector, the ignition coil, and
the PCM, then go to step 1. If any other T e m p o r a r y
DTCs or DTCs are indicated, go to the indicated
D T C s t r o u b l e s h o o t i n g .
NO—If the PCM w a s updated, t r o u b l e s h o o t i n g is
complete. If the PCM w a s substituted, replace the
original PCM (see page 1 1 - 2 1 9 ) . •
11-120