Honda ACCORD HYBRID 2005 Service Manual page 562

Active Control Engine Mount (ACM) System
E n g i n e M o u n t V i b r a t i o n a n d N o i s e I n s p e c t i o n
1. Turn the ignition switch ON (II).
2. Clear the DTC w i t h the HDS.
3. Check for Temporary DTCs or DTCs w i t h the HDS.
• If there are any Temporary DTCs or DTCs
indicated, go to the indicated D T C s
troubleshooting.
• If there are no Temporary DTCs or DTCs
indicated, go to step 4.
4. Open the engine hood.
5. Select the ACM in the INSPECTION MENU w i t h the
HDS.
7. Check for any of these conditions that may cause
increased vibration and noise:
• Engine misfire
• Deformed radiator m o u n t i n g parts (brackets
upper cushions, or lower cushions)
• Loose bumper beam
• Looseness, deformation, or tears in the rubber
portion of the engine or transmission mounts
• Loose, damaged, or interference f r o m exhaust
system parts
• Collision damage to the f r a m e or undercarriage
• A b n o r m a l wear of tires
• Loose or damaged suspension parts
• Wheel alignment out of specification
6. Feel the engine for vibration w h i l e you turn the
engine mounts on and off w i t h the HDS.
• If the engine moves w h e n you turn the engine
mounts on and off, go to step 7.
• If the engine does not move w h e n you turn the
engine mounts on and off, replace the
corresponding engine mount, front engine
m o u n t (see page 5-22), rear engine mount
(see page 5-24).
11-322