Honda ACCORD HYBRID 2005 Service Manual page 197

18. Install the shift cable bracket, then install the
harness c l a m p (see step 14 on page 5-13).
19. Tighten the rear m o u n t bolt, then install the rear
m o u n t stop. Connect the rear active control engine
m o u n t actuator connector (see step 15 on page
5-14).
20. Tighten the front m o u n t bolt, then install the front
m o u n t stop. Connect the front active control engine
m o u n t actuator connector, then install the harness
c l a m p (see step 17 on page 5-14).
2 1 . Install exhaust pipe A, using n e w gaskets and new
self locking nuts (see step 21 on page 5-14).
22. Raise the vehicle on the hoist to full height.
23. Connect the suspension lower arms to the knuckles
(see step 5 on page 18-22).
24. Connect the tie-rod end ball joints to the knuckles
(see step 29 on page 17-58).
25. Install the damper fork (see step 3 on page 18-21).
26. Connect the stabilizer links (see page 18-23).
27. Install splash shield (see step 27 on page 5-15).
28. Install the front wheels.
29. Lower the vehicle on the hoist.
30. Install the connector bracket to the front cylinder
head (see step 34 on page 5-16).
3 1 . Install the harness clamp bracket to the rear
cylinder head (see step 35 on page 5-16).
32. Align the reference mark on the steering joint and
steering gearbox pinion shaft. Connect the steering
joint to the steering gearbox pinion shaft. Tighten
the steering joint bolt. Install the steering joint
cover (see step 36 on page 5-16).
33. Connect the connectors to the steering gearbox
(see step 42 on page 5-17).
34. Install the intake m a n i f o l d cover (see step 51 on
page 5-19).
35. Install the front grille cover (see step 1 on page
20-111).
36. Refill the engine w i t h oil (see step 4 on page 8-7).
7-31