Honda ACCORD HYBRID 2005 Service Manual page 731

17. Reinstall the IPU lid (see page 12-140), then turn the
battery module switch ON (see page 12-4).
18. Update the M C M if it does not have the latest
software, or substitute a k n o w n - g o o d M C M
(see page 12-8).
19. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
YES—If DTC P0A62 is indicated, check for poor
connections or loose terminals at the V phase
motor current sensor and the M C M , then go to
step 1. If any other T e m p o r a r y DTCs or DTCs are
indicated, go to the indicated D T C s
t r o u b l e s h o o t i n g .
NO—If the M C M was updated, troubleshooting is
complete. If the M C M was substituted, replace the
original M C M (see page 1 2 - 8 ) . •