Honda ACCORD HYBRID 2005 Service Manual page 1062

Automatic Transmission
4 t h C l u t c h T r a n s m i s s i o n F l u i d P r e s s u r e S w i t c h R e p l a c e m e n t
1. Remove the intake air duct and air cleaner housing.
2. Disconnect the 4th clutch transmission fluid
pressure switch harness connectors (A).
6 x 1.0 m m
12 N-m (1.2 k g f m , 8.7 Ibf-ft)
3. Remove the bolt securing the connector b r a c k e t
and remove the connector bracket (B) and harness
c l a m p bracket (C).
4. Remove the 4th clutch t r a n s m i s s i o n f l u i d pressure
switch.
5. Make sure there is no water, o i l , dust, or foreign
particles inside the connector.
/
20 N m
(2.0 k g f m , 14 Ibf-ft)
6. Install the n e w 4th clutch transmission f l u i d
pressure switch (A) and a n e w sealing washer (B),
and tighten the switch.
7. Install the harness c l a m p bracket and connector
bracket w i t h the m o u n t i n g bolt.
8. Connect the connectors securely.
9. Install the intake air duct and air cleaner housing.
14-226