Honda ACCORD HYBRID 2005 Service Manual page 373

19. Turn the ignition switch OFF.
20. Replace the brake booster pressure sensor
(see page 11-220).
2 1 . Reconnect all connectors.
22. Turn the ignition switch ON (II).
23. Reset the PCM w i t h the HDS.
24. Do the PCM idle learn procedure (see page 11-340).
25. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0558 is indicated, check for poor
connections or loose terminals at the brake booster
pressure sensor and the PCM, then go to step 1. If
any other T e m p o r a r y DTCs or DTCs are indicated,
go to the indicated D T C s troubleshooting.
NO—Troubleshooting is complete. •
26. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
27. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0558 is indicated, check for poor
connections or loose terminals at the brake booster
pressure sensor and the PCM, then go to step 1. If
any other T e m p o r a r y DTCs or DTCs are indicated,
go to the indicated D T C s t r o u b l e s h o o t i n g .
NO—If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-219). •
11-133