Honda ACCORD HYBRID 2005 Service Manual page 352

PGM-FI System
DTC Troubleshooting (cont'd)
15. Turn the ignition switch ON (II).
16. Reset the PCM w i t h the HDS.
17. Clear the CKP pattern w i t h the HDS.
18. Do the PCM idle learn procedure (see page 11-340).
19. Do the CKP pattern learn procedure (see page 11-4).
20. Test-drive the vehicle for several minutes in the
range of the recorded freeze data.
2 1 . Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P0301, P0302, P0303, P0304, P0305, or
P0306 are indicated, check for poor connections or
loose terminals at the ignition coil, the injector, and
the PCM, then go to t r o u b l e s h o o t i n g DTC P0301,
P0302, P0303, P0304, P0305, or P0306 (see page
11-113). If any other T e m p o r a r y DTCs or DTCs are
indicated, go to the indicated D T C s
t r o u b l e s h o o t i n g .
N O — G o t o step 22.
22. M o n i t o r the OBD STATUS for DTC P0301, P0302,
P0303, P0304, P0305, or P0306 in the DTCs MENU
w i t h the HDS.
Does the screen indicate PASSED?
YES—Troubleshooting is complete. •
NO—If the screen indicates FAILED, go to step 1
and recheck. If the screen indicates EXECUTING,
keep driving until a result comes on. If the screen
indicates OUT OF CONDITION, go to step 20 and
recheck.
11-112