Honda ACCORD HYBRID 2005 Service Manual page 1134

Valve Body
S e c o n d a r y V a l v e B o d y D i s a s s e m b l y , I n s p e c t i o n , a n d R e a s s e m b l y
1. Clean all parts t h o r o u g h l y in solvent or carburetor cleaner, and dry t h e m w i t h compressed air. Blow out all
passages.
2. Do not use a magnet to r e m o v e the check balls, it may magnetize the check balls.
3. Inspect the secondary valve body for scoring and damage.
4. Check all valves for free m o v e m e n t . If any fail to slide freely, refer to valve body repair (see page 14-294).
5. Coat all parts w i t h ATF d u r i n g assembly.
1/
V A L V E SPRING SPECIFICATIONS
Valve Springs
Standard (New)-Unit: m m (in.)
Valve Springs
Wire Diameter O.D.
Free Length No. of Coil
A CPC valve C spring
0.7 (0.028) 6.1 (0.240) 17.8(0.701) 7.9
B Shift valve D spring 0.7 (0.028) 6.6(0.260) 42.4(1.669)
17.6
C Reverse CPC valve spring 0.8(0.031)
6.1 (0.240) 24.4(0.961) 14.6
D Shift valve C spring 0.8(0.031) 6.6(0.260) 49.1 (1.933) 21.7
E CPC valve B spring 0.7 (0.028) 6.1 (0.240)
17.8 (0.701) 7.9
F Reverse control valve spring 0.8(0.031) 6.6(0.260) 49.1 (1.933) 21.7
14-298