Honda ACCORD HYBRID 2005 Service Manual page 487

16. Replace the APP sensor (see page 11-265).
17. Reconnect all connectors.
18. Turn the ignition switch ON (II).
19. Reset the PCM w i t h the HDS.
20. Do the PCM idle learn procedure (see page 11-340).
21. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P2127 is indicated, check for poor
connections or loose terminals at APP sensor B and
the PCM, then go to step 1. If any other Temporary
DTCs or DTCs are indicated, go to the indicated
DTCs troubleshooting.
NO—Troubleshooting is complete. •
22. Update the PCM if it does not have the latest
software, or substitute a known-good PCM
(see page 11-6).
23. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S - l f DTC P2127 is indicated, check for poor
connections or loose terminals at APP sensor B and
the PCM, then go to step 1. If any other Temporary
DTCs or DTCs are indicated, go to the indicated
D T C s troubleshooting.
NO—If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 1 1 - 2 1 9 ) . •