Honda ACCORD HYBRID 2005 Service Manual page 1139

C o u n t e r s h a f t B e a r i n g R e p l a c e m e n t
Special Tools Required
• Adjustable bearing puller, 25—40 m m
07736-A01000B or 07736-A01000A
• Driver 07749-0010000
• Attachment, 78 x 80 m m 07NAD-PX40100
1. Remove the countershaft bearing f r o m the torque
converter housing w i t h the special tool and a
c o m m e r c i a l l y available 3/8 "-16 " slide h a m m e r (A).
2. Install the ATF guide plate (A) into the housing,
then install the new bearing (B) in the direction
s h o w n .
B
3. Install the bearing (A) in the housing w i t h the
special tools; install bearing outer notch-cut (B) in
depth (C) of 0—0.03 m m (0—0.001 in.) below the
housing surface (D).
07749-0010000
14-303