Honda ACCORD HYBRID 2005 Service Manual page 553

11. Measure voltage between active control engine
m o u n t (ACM) control relay 4P connector terminal
No. 1 and body g r o u n d .
ACTIVE C O N T R O L ENGINE MOUNT (ACM)
CONTROL R E L A Y 4P CONNECTOR
MI
+ B (WHT/RED)
Wire side of female terminals
As there battery voltage?
Y E S — G o t o step 12.
NO—Repair open in the w i r e between the active
control engine mount (ACM) control relay and the
A C M (15 A) fuse, then go to step 20.
12. Disconnect the engine m o u n t control unit 20P
connector.
13. Check for continuity between active control engine
m o u n t (ACM) control relay 4P connector terminal
No. 2 and engine m o u n t control unit 20P connector
terminals No. 3 and No. 12 individually.
ACTIVE CONTROL ENGINE MOUNT (ACM)
C O N T R O L R E L A Y 4P C O N N E C T O R
Wire side of female t e r m i n a l s
ENGINE MOUNT C O N T R O L UNIT
20P CONNECTOR
[IGSOL1 (YEL)
1 2 3 4
i — i
5 6
/
8 9
10 11 12
/
14 15 16 17
/ /
20
IGSOL2 (YEL)
Wire side of f e m a l e t e r m i n a l s
Is there continuity?
YES—Go to step 14.
NO—Repair open in the w i r e between the engine
m o u n t control unit (No. 3, No. 12) and the active
control engine mount (ACM) control relay, then go
to step 20.
14. Turn the ignition switch ON (II).
(cont'd)
11-313