Honda ACCORD HYBRID 2005 Service Manual page 629

13. Start the engine. Hold the engine speed at
3,000 r p m w i t h o u t load (in Park or neutral) until the
radiator fan comes o n , then let it idle.
14. Test-drive for about 10 minutes, continually
changing the vehicle speed.
15. Check the CATA M O N TEMP in the DATA LIST w i t h
the HDS.
Is the temperature OK?
Y E S — G o t o step 16.
NO—Go to step 13 and recheck.
16. Test-drive under these conditions:
20. Monitor the OBD STATUS for DTC P0420 and/or
P0430* in the DTCs M E N U w i t h the HDS.
Does the screen indicate PASSED?
Y E S — T r o u b l e s h o o t i n g is complete. •
NO—If the screen indicates FAILED, check the fuel
quality. If the screen indicates EXECUTING, keep
driving until a result comes on. If the screen
indicates OUT OF CONDITION, go to step 13 and
recheck.
• Engine coolant temperature above 158 °F (70 °C)
• Transmission in D position
• Vehicle speed at 55 m p h (88 km/h) for 5 minutes
or more w i t h cruise control set
17. M o n i t o r the OBD STATUS for DTC P0420 and/or
P043Q* in the DTCs MENU w i t h the HDS.
Does the screen indicate EXECUTING?
Y E S — G o t o step 18.
NO—Go to step 16 and recheck.
18. Continue test-driving until a result comes on.
19. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — G o to the indicated D T C s t r o u b l e s h o o t i n g .
N O — G o t o step 20/
11-389