Honda ACCORD HYBRID 2005 Service Manual page 458

PGM-FI System
M A P S e n s o r R e p l a c e m e n t
1. Remove the intake m a n i f o l d cover (see step 1 on
page 9-3).
2. Disconnect the MAP sensor connector (A).
/ 3 . 5 N - m
r (0.35 kgf-m, 2.5 Ibfft)
3. Remove the screw (B).
4. Remove the MAP sensor (C).
5. Install the sensor in the reverse order of removal
w i t h a new O-ring (D).
E C T S e n s o r 2 R e p l a c e m e n t
1. Remove the throttle body (see page 11-386).
2. Disconnect the ECT sensor 2 connector (A).
3. Remove ECT sensor 2 (B).
4. Install the sensor in the reverse order of removal
w i t h a new O-ring (C), then refill the radiator w i t h
engine coolant (see page 10-6).
11-218