Honda ACCORD HYBRID 2005 Service Manual page 1063

A T F T e m p e r a t u r e S e n s o r R e p l a c e m e n t
1. Remove the splash shield.
2. Disconnect the ATF temperature sensor connector
(A), then remove the connector f r o m the connector
bracket (B).
3. Remove the harness c l a m p (C) f r o m its bracket (D).
4. Remove the ATF temperature sensor, and replace
the sensor.
5. Install a new O-ring (E) on the new ATF
temperature sensor (F).
6. Install the ATF temperature sensor connector to the
connector bracket, then connect the connector
securely.
7. Install the harness clamp on its bracket.
8. Install the splash shield.
6 x 1 . 0 m m
1 2 N m
( 1 . 2 k g f m ,
8 . 7 Ibf ft)
14-227