Honda ACCORD HYBRID 2005 Service Manual page 848

Automatic Transmission
S y m p t o m T r o u b l e s h o o t i n g I n d e x
Symptom Probable cause(s) Notes
W h e n y o u turn the
ignition switch ON
(II), the D indicator
comes on and
stays on in all shift
lever positions, or
it never comes on
at all
• MET INH line between PCM and
gauge control m o d u l e defective
• Gauge control m o d u l e defective
• PCM defective
• Check for a short or an open in MET INH w i r e
between PCM connector t e r m i n a l E31 and gauge
control m o d u l e (see page 14-269).
• Check A/T gear position indicator drive circuit in
the gauge control m o d u l e by gauge control
module self-diagnostic f u n c t i o n (see page
22-226).
A/T gear position
indicator does not
c o m e on while the
shift lever is in that
position
• MET INH line between PCM and
gauge control m o d u l e defective
• Gauge control m o d u l e defective
• PCM defective
• Check for a short or an open in MET INH w i r e
between PCM connector t e r m i n a l E31 and gauge
control m o d u l e (see page 14-269).
• Check A/T gear position indicator drive circuit in
the gauge control m o d u l e by gauge control
module self-diagnostic f u n c t i o n (see page
22-226).
Shift lever cannot
be m o v e d f r o m P
w h i l e you're
pressing on the
brake pedal
A p r o b l e m in the shift lock system of
the interlock system
Check the interlock system - shift lock system
circuit (see page 14-276).
Ignition switch
cannot be m o v e d
f r o m ACC (1) to
LOCK (0) (key is
pushed in, shift
lever in P)
A p r o b l e m in the key interlock system
of the interlock system
Check the interlock system - key interlock system
circuit (see page 14-278).
14-12