Thermostat Replacement - Honda ACCORD HYBRID 2005 Service Manual

Cooling System
T h e r m o s t a t R e p l a c e m e n t
1. Remove the air cleaner housing assembly (see page 11-382).
2. Drain the engine coolant (see page 10-6).
3. Remove the ground cable and thermostat cover, then remove the thermostat.
T H E R M O S T A T
nstall w i t h pin up.
T H E R M O S T A T C O V E R
G R O U N D C A B L E
6 x 1.0 mm
12 N-m (1.2 k g f m , 8.7 Ibfft)
4. Install the thermostat w i t h a n e w rubber seal.
5. Refill the radiator w i t h engine coolant, then bleed the air f r o m the cooling system (see step 8 on page 10-7).
6. Clean up any spilled engine coolant.
10-8