Honda ACCORD HYBRID 2005 Service Manual page 1070

Automatic Transmission
T r a n s m i s s i o n R e m o v a l (cont'd)
19. Remove the harness c l a m p (A) f r o m the c l a m p
bracket (B).
20. Disconnect the A/T clutch pressure control solenoid
valve C connector, and remove the connector
bracket (D) and the harness c l a m p bracket.
2 1 . Remove the bolts securing the harness clamp
brackets.
22. Disconnect the auxiliary transmission fluid p u m p
(ATFP) motor connector (A) and the input shaft
(mainshaft) speed sensor connector (B).
23. Disconnect the transmission range switch
connector (A), and remove the harness c l a m p (B)
f r o m the clamp bracket (C).
24. Disconnect the output shaft (countershaft) speed
sensor connector (D), 3rd clutch transmission fluid
pressure switch connector (E), and ATF
temperature sensor connector (F).
14-234