Crankshaft And Piston Installation - Honda ACCORD HYBRID 2005 Service Manual

Engine Block
Crankshaft and Piston Installation
Special Tools Required
• Driver 07749-0010000
• Driver attachment, 106 m m 070AD-RCA0200
1. Check the connecting rod bearing clearance w i t h
plastigage (see page 7-9).
2. Check the main bearing clearance w i t h plastigage
(see page 7-7).
3. Install the bearing halves in the engine block and
connecting rods.
4. A p p l y new engine oil to all the main bearing and
rod bearing journals.
5. Lower the crankshaft (A) into the block.
A
6. A p p l y new engine oil to the thrust washer surfaces.
Install the thrust washers (A) in the No. 3 journal.
7. Install the bearings (A) and bearing caps (B) w i t h
the a r r o w (C) facing the t i m i n g belt end of the
engine.
o
o
C\J
o
CO
o o o
o o o
<?
10 x 60 m m
10 x 109 m m
E ^ E
1 0 x 8 0 m m 1 0 x 6 0 m m
8. A p p l y new engine oil to the bolt threads and
flanges, then loosely install the bearing cap bolts
(D) and bearing cap side bolts (E).
7-24