Honda ACCORD HYBRID 2005 Service Manual page 481

10. J u m p the SCS line w i t h the HDS.
11. Disconnect PCM connector C (22P).
12. At the wire harness side, check for continuity
between APP sensor 6P connector terminal No. 4
and body ground.
APP S E N S O R 6P C O N N E C T O R
1 2 3 4 5 6
A P S A (RED/BLU)
Wire side of f e m a l e t e r m i n a l s
Is there continuity?
YES—Repair short in the w i r e between APP
sensor A and the PCM (C5), then go to step 17.
N O — G o t o step 13.
13. Connect PCM connector terminal C5 to body
g r o u n d w i t h a j u m p e r w i r e .
PCM C O N N E C T O R C (22P)
A P S A (RED/BLU)
1 2
3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22
J U M P E R WIRE
Wire side of female t e r m i n a l s
14. At the w i r e harness side, check for continuity
between APP sensor 6P connector terminal No. 4
and body g r o u n d .
APP S E N S O R 6P C O N N E C T O R
1 2 3 4 5 6
A P S A (RED/BLU)
Wire side of f e m a l e t e r m i n a l s
Is there continuity?
Y E S — G o t o step 22.
NO—Repair open in the w i r e between APP
sensor A and the PCM (C5), then go to step 17.
15. Measure voltage between PCM connector
terminals C4 and C6.
PCM C O N N E C T O R C (22P)
S G 3 (GRN) V C C 3 (YEL/GRN)
1 2
3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22
Wire side of f e m a l e t e r m i n a l s
Is there about 5 V?
YES—Repair open in the w i r e between the PCM
(C6) and APP sensor A, then go to step 17.
N O — G o t o step 22.
(cont'd)
11-241