Honda ACCORD HYBRID 2005 Service Manual page 1133

A T F P u m p I n s p e c t i o n
1. Install the ATF p u m p drive gear (A), driven gear (B),
and ATF p u m p driven gear shaft (C) in the main
valve body (D). Lubricate all parts w i t h ATF, and
install the ATF p u m p driven gear w i t h its grooved
and chamfered side facing up.
C
D
2. Measure the side clearance of the ATF p u m p drive
gear (A) and driven gear (B).
ATF Pump Gears Side (Radial) Clearance
Standard (New):
ATF Pump Drive Gear
0 . 2 1 0 - 0 . 2 6 5 mm (0.0083-0.00104 in.)
A T F Pump Driven Gear
0 . 0 7 0 - 0 . 1 2 5 mm (0.0028-0.0050 in.)
A
3. Remove the ATF p u m p driven gear shaft. Measure
the thrust clearance between the ATF p u m p driven
gear (A) and the valve body (B) w i t h a straight edge
(C) and a feeler gauge (D).
A T F Pump Drive/Driven Gear Thrust (Axial)
Clearance
Standard (New): 0.03—0.06 mm (0.001—0.002 in.)
Service Limit: 0.07 mm (0.003 in.)
C
D
14-297