Honda ACCORD HYBRID 2005 Service Manual page 532

Active Control Engine Mount (ACM) System
D T C T r o u b l e s h o o t i n g (cont'd)
13. Turn the ignition switch OFF.
14. Reconnect all connectors.
15. Turn the ignition switch ON (II).
16. Reset the PCM w i t h the HDS.
17. Do the PCM idle learn procedure (see page 11-340).
18. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs with the HDS?
YES—If DTC P0A16 and/or P0AB8* are indicated,
check for poor connections or loose terminals at
the engine m o u n t control unit and the active
control engine mount (ACM) actuator, then go to
step 1. If any other Temporary DTCs or DTCs are
indicated, go to the indicated D T C s
troubleshooting.
NO—Troubleshooting is complete. •
11-292