Honda ACCORD HYBRID 2005 Service Manual page 990

Automatic Transmission
D T C T r o u b l e s h o o t i n g ( c o n t ' d )
9. Check for continuity between A/T clutch pressure
control solenoid valve A connector terminal No. 2
and body g r o u n d .
A / T C L U T C H P R E S S U R E C O N T R O L
SOLENOID V A L V E A C O N N E C T O R
W i r e side of f e m a l e t e r m i n a l s
Is there continuity?
YES—Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 14-7), then recheck. If the s y m p t o m /
indication goes away w i t h a k n o w n - g o o d PCM,
replace the original P C M . B
NO—Repair an open in the w i r e between the A/T
clutch pressure control solenoid valve A and
g r o u n d (G101, G102), or repair a poor g r o u n d
(G101, G102), then g o t o step 10.
10. Clear the DTC w i t h the HDS.
11. Test-drive the vehicle for several minutes in the D
position in all five gears.
12. M o n i t o r the OBD status for P0963 in the DTCs/
Freeze Data in A/T Mode M e n u for a pass/fail.
Does the result indicate a pass?
YES—The p r o b l e m has been corrected. •
NO—Return to step 6 and recheck.
14-154