Table of Contents
Advertisement
5.2
Assigning a LAN IP Address
1. Select the Configuration tab and then select BASIC.
2. Enter a name for the module in the Module Name field.
3. Enter the APN (Access Point Name). This information is provided by your cellular provider.
4. Internet Access via LAN is also possible. Enable this parameter and then click APPLY. You
will be asked to enter a gateway and 2 DNS servers.
Note: WAN interface is disabled when LAN is enabled.
5. Enter the IP Address and Subnet Mask of the OWL-IPG-AMERICAS.
6. Choose whether or not to use DHCP (Dynamic Host Configuration Protocol) for end
devices.
a) If YES, enable the DHCP SERVER option and select a DHCP Range of IP addresses
applicable to multiple end devices.
23
Installation OWL IPG
Release 01, 01/2020
Advertisement
Table of Contents
