First Use; Connecting The Router Before First Use; Start; Configuration - Hirschmann OWL 4G Europe User Manual

7 First Use

7.1 Connecting the Router Before First Use

Before putting the router into operation it is necessary to connect all of the components that
are required to run your applications. Don't forget to insert a SIM card.
The router can not operate without a connected antenna, SIM card and power supply. If
the antenna is not connected, the router may be damaged.

7.2 Start

The router will start when a power supply is connected to the router. By default, the router will
automatically start to log on to the default APN. The DHCP server will start to assign addresses
for devices connected through the Ethernet port ETH0. These router behaviors can be changed
via the web interface. This is described in detail in the "Configuration OWL 4G Family" user
manual that you can download at: https://www.doc.hirschmann.com/.
7.3 Configuration
If no SIM card is inserted in the router, it is not possible for the router to operate. Any
inserted SIM card must have active data transmission.
7.3.1 Configuration by Web Browser
For status monitoring, configuration and administration of the router a web interface is avail-
able which can be accessed by entering the IP address of the router into the web browser. The
default IP address of the router is 192.168.1.1. It is necessary to use the HTTPS protocol
for secure communication over a network.
By default, configuration can only be performed with the default username "admin" and
default password "private".
UM Installation OWL 4G Europe
Release 01 - 08/2019
Figure 23: Entering the IP address of the router
35