Sntp Configuration - Hirschmann rsb20 Reference Manual

Time

3.1 SNTP configuration

The Simple Network Time Protocol (SNTP) enables you to synchronize the
system time in your network.
The device supports the SNTP client and the SNTP server function.
The SNTP server makes the UTC (Universal Time Coordinated) available.
UTC is the time relating to the coordinated world time measurement. The
time displayed is the same worldwide. Local time differences are not taken
into account.
SNTP uses the same packet format as NTP. In this way, an SNTP client can
receive the time from an SNTP server as well as from an NTP server.
Note: For accurate system time distribution with cascaded SNTP servers
and clients, use only network components (routers, switches, hubs) in the
signal path between the SNTP server and the SNTP client which forward
SNTP packets with a minimized delay.
Parameter
Function
Table 4: Configuration SNTP Client and Server
Parameter Meaning
SNTP Status Displays conditions such as "Server
cannot be reached".
Table 5: SNTP Status
RM Web L2B
Release 5.3 05/2012
Meaning
Switch the SNTP function on and off
In this frame you switch the SNTP function on/off.
When it is switched off, the SNTP server does not send any SNTP
packets or respond to any SNTP requests.
The SNTP client does not send any SNTP requests or evaluate any
SNTP Broadcast/Multicast packets.
3.1 SNTP configuration
Possible Values
-
Default Setting
-
53